I'm just trying to understand it, Dr Pen's lowest settings (A6, A7, M8) is like 8000 or so rpms which equates to 133 oscillations, correct?
If we are using 12 needle cartridges thats 12 x 133 = 1596 strikes per second. So we move about 1 cm per second.
The article summary of the article, given by benjt2, says to move 2 cm per second.
So if I have the oscillations conversion from RPM correct, then if we have a 12pin Dr Pen on a setting of 8000 RPM then we should aim for between 1-2 seconds per cm and then we are following the protocol fairly well, correct?
If we are using 12 needle cartridges thats 12 x 133 = 1596 strikes per second. So we move about 1 cm per second.
The article summary of the article, given by benjt2, says to move 2 cm per second.
So if I have the oscillations conversion from RPM correct, then if we have a 12pin Dr Pen on a setting of 8000 RPM then we should aim for between 1-2 seconds per cm and then we are following the protocol fairly well, correct?
